Palm 2.0 Portable Vaporizer

PALM 2.0 Vaporizer Overview

Constantly searching for optimum efficiency, the PALM 2.0 Vaporizer is the latest portable Vaporizer manufactured by VaporBLUNT Inc. in the United States.

Utilizing an even more compact design than its predecessor, the Palm Original, the PALM 2.0 Vaporizer measures only 1 1/2" (L) x 1 1/4" (W) x 2 1/2" (H) in size.

Introduced to the market at the end of 2012, the PALM 2.0 Vaporizer is a direct application, convection based, portable Vaporizer that can be used for a plethora of outdoor activities such as hiking, biking, and snowboarding to name a few!

Built with a durable polycarbonate outer shell, the PALM 2.0 Vaporizer uses steel rods inside the ceramic heating chamber combined with a rechargeable NIMH battery to achieve the desired vaporization level.

A unique replaceable screen and a food grade plastic air path allows you to keep the PALM 2.0 Vaporizer clean and performing at a maximum level time after time for both dried blends and concentrated essential oils.

As an extra bonus, the PALM 2.0 Vaporizer comes with both a standard and flavored tip mouthpiece, allowing you to switch between mouthpieces accordingly.

How the PALM 2.0 Vaporizer Works

The rapid heat-up provides immediate vapor. You can prepare, use, and reload without having to wait.

The PALM 2.0 Vaporizer is easy to use: simply grind your blend to a fine consistency. Open the acrylic lid and place your material into the filling chamber. Close the lid, a mesh screen on the top of the PALM 2.0 Vaporizer provides a layer of protection, keeping any blend from flowing through the air path.

Your PALM 2.0 Vaporizer is now ready for use, insert and firmly press a freshly charged battery into the battery port, located underneath the PALM 2.0 Vaporizer and start enjoying your vapor.

On average, one battery will support 30 minutes of continuous Vaporization. One load will provide between 4 to 8 draws, depending on your usage/taste preferences.

PALM 2.0 Vaporizer Quick Heat up Time

The PALM 2.0 Vaporizer has a rapid warm-up time of only 5-10 seconds once the nickel hybrid battery is inserted into the heating element. Since the Mouthpiece is located on the top of the PALM 2.0 Vaporizer, a clean Vapor is generated by using your breath in conjunction with the heater to provide a quality Vapor.

The PALM 2.0 Vaporizer is calibrated to be at 380 F within seconds after the unit is started. The temperature in the device is controlled by the draw rate/breath control. To achieve higher temperatures with your blend, draw very slowly.

By drawing directly from the PALM 2.0 Vaporizer you will also be able to sense the temperature of the vapor stream as well as the taste. Simply remove the battery when you are finished taking a draw, otherwise the blend will get too hot.

At a temperature of 380 Degrees Fahrenheit, you must be careful on your application method and how long you keep the battery in the PALM 2.0 Vaporizerto avoid overheating your blend.

PALM 2.0 Vaporizer Maintenance

Keeping the PALM 2.0 Vaporizer clean is easy, use the cleaning brush to scrape the screen between uses and avoid residue build-up. You can also blow into the screen to remove excess deposit.

PALM 2.0 Vaporizer Vaporizer Warranty

Each PALM 2.0 Vaporizer unit comes with a Lifetime manufacturer's warranty that is restricted to normal use. The rechargeable nickel hybrid batteries are equipped with a 3 month warranty.

PALM 2.0 Vaporizer Includes:

1 pc. PALM 2.0 Vaporizer

2 pc. Batteries

2 pc. Mouthpiece Tips

1 pc. Cleaning Tool

1 pc. Cleaning Brush

1 pc. PALM 2.0 Vaporizer Charger

1 pc. PALM 2.0 Vaporizer Instruction Manual

Browse for more products in the same category as this item:

Vaporizers > Portable
Vaporizers
Clearance


Chameleon Glass Skellington Spoon Hand Pipe	Chameleon Glass Eight Ball Hand Pipe	$16 Glass Hand Pipe	$16 Glass Hand Pipe
$44.99	$34.99	$16.00	$16.00